Industry Knowledge

1. Cleaning method

Gentle cleaning: Use a soft cloth or sponge to dip in a neutral detergent (such as diluted detergent water) to wipe the surface, and avoid using strong acids, strong alkalis or detergents containing abrasives to avoid corrosion of the sealant.

Avoid scratching: Do not use sharp objects such as steel wool and blades when cleaning to prevent scratching the glass or damaging the edge sealing structure.

Drying treatment: After cleaning, wipe off water stains with a dry cloth, especially around the sealing strips, to avoid water infiltration.

2. Check the sealing

Observe the edges: Regularly check whether the sealant on the edges of the insulating glass is cracked, detached or aged. If gaps or air leaks are found (manifested as internal fogging and dust accumulation), contact professionals in time to repair or replace them.

Beware of condensation: If water vapor or fog appears in the glass interlayer, it means that the seal has failed and needs to be dealt with as soon as possible, otherwise it will affect the thermal insulation performance.

3. Avoid external impact

Protect corners: The edges of insulating glass are fragile. Avoid collisions when transporting or cleaning to prevent damage to the sealing structure.

Reduce pressure: Do not push or pull doors and windows with insulating glass to avoid uneven force on the glass due to deformation of the frame.

4. Environmental control

Moisture and mildew prevention: Humid environments (such as bathrooms) need to be ventilated to prevent the sealant from being damp and moldy for a long time.

Avoid extreme temperature differences: Sudden cold and hot may cause glass deformation or sealant aging. Curtains, blinds, etc. can be used to reduce direct sunlight.

5. Regular inspection and maintenance

Annual inspection: Focus on the state of the sealant, whether the glass is loose, and whether there are impurities or water vapor inside.

Hardware accessories: If insulating glass is used for doors and windows, hinges, slide rails and other hardware must be maintained simultaneously to ensure smooth opening and closing and reduce pulling on the glass.

6. Problem handling

Fog or air leakage: Contact professional repair immediately, do not disassemble by yourself to avoid further damage.

Replacement suggestion: If the seal fails and cannot be repaired, the glass needs to be replaced as a whole. Choose products from regular manufacturers to ensure the quality of the gas filling layer (such as argon) and the seal.

7. Precautions

Do not punch holes by yourself: If accessories (such as handles) need to be installed, they should be operated by professionals to avoid damaging the hollow layer.

Avoid high-temperature heat sources: Long-term proximity to heaters, stoves, etc. may accelerate the aging of sealants.

Life reminder

The normal life of insulating glass is about 10-15 years, which can be extended if properly maintained. When the service life exceeds the service life or the performance is significantly reduced, it is recommended to evaluate and replace it.

The above methods can effectively extend the service life of insulating glass and maintain its heat and sound insulation effects. If you encounter complex problems, be sure to seek professional help to avoid greater losses due to improper operation.